Mechanical, Servicing & Body Repairs

Full engine oil and filter change using manufacturer-specified oil grade. Keeps your engine protected and running efficiently. Suitable for all petrol, diesel, and hybrid vehicles.

Essential mid-year service covering oil and filter change, fluid top-ups, tyre check, lights, and a full safety inspection. Ideal between full annual services.

Comprehensive service to manufacturer schedule — oil, filters, spark plugs, brake inspection, fluid checks, belts, and a full vehicle health check. Keeps your warranty valid.

Full service plus timing belt check, transmission fluid, coolant flush, fuel filter, and a thorough inspection of all major systems. Recommended every 2 years or 24,000 miles.

Worn spark plugs cause misfires, poor fuel economy, and hard starting. We replace with OEM-spec plugs to restore smooth running and performance.

A blocked air filter reduces engine performance and fuel economy. Quick replacement using quality filters to keep your engine breathing freely.

Keeps dust, pollen, and pollutants out of your cabin. Essential for air conditioning efficiency and air quality inside the vehicle.

A clogged fuel filter starves the engine and can damage the fuel pump. We replace at recommended intervals to protect your fuel system.

Old coolant loses its anti-corrosion properties and can cause overheating. Full system flush and refill with the correct specification coolant.

Brake fluid absorbs moisture over time, lowering its boiling point and reducing braking performance. Full flush and replacement to keep your brakes safe.

Degraded power steering fluid causes stiff, noisy steering. We flush and replace to restore smooth, responsive steering feel.

Fresh gearbox oil reduces wear, prevents overheating, and keeps gear changes smooth. Suitable for manual and automatic transmissions.

Diesel vehicles with SCR systems require regular AdBlue top-ups. We top up, reset warnings, and diagnose any AdBlue system faults.

Worn shock absorbers cause poor handling, longer stopping distances, and uneven tyre wear. We replace in axle pairs using quality units.

MacPherson strut replacement including spring, bearing, and top mount where required. Restores ride quality and handling precision.

Broken or sagging springs affect ride height, handling, and tyre wear. Replaced in pairs to maintain even suspension geometry.

Worn rubber bushes cause knocking, vague steering, and poor handling. We replace individual bushes or full control arms as required.

Worn ball joints are an MOT failure and a safety hazard. We replace with quality parts and check alignment afterwards.

Worn track rod ends cause vague steering and uneven tyre wear. Replaced and followed by a wheel alignment check.

Worn drop links cause knocking over bumps and reduced cornering stability. Quick and cost-effective to replace.

Noisy, rumbling wheel bearings are an MOT failure and can be dangerous if left. We diagnose the correct bearing and replace to manufacturer specification.

A failing power steering pump causes heavy, noisy steering. We replace and bleed the system to restore full power assistance.

Leaking or worn steering racks cause vague, unpredictable steering. We replace or rebuild and set alignment to specification.

Correct wheel alignment prevents uneven tyre wear and improves fuel economy and handling. We use laser alignment equipment for accurate results.

Unbalanced wheels cause vibration through the steering wheel and premature tyre wear. We balance all four wheels using precision equipment.

Full clutch kit replacement — clutch plate, pressure plate, and release bearing — for all manual vehicles. We also inspect and replace the flywheel if worn.

Worn dual-mass flywheels cause judder, noise, and clutch slip. We replace the flywheel and clutch kit together for a complete drivetrain overhaul.

Manual and automatic gearbox repair, rebuild, and replacement. We diagnose the fault first and advise on the most cost-effective solution.

Automatic gearbox fluid change, filter replacement, and full service for conventional automatics, DSG, CVT, and semi-automatic transmissions.

Clicking or vibrating driveshafts indicate worn CV joints. We replace individual joints or complete driveshaft assemblies as required.

Vibration from the propshaft on rear-wheel and four-wheel drive vehicles. We replace propshafts, centre bearings, and universal joints.

Noisy or leaking differentials on rear-wheel and four-wheel drive vehicles. We service, repair, or replace front and rear differentials.

Specialist diesel particulate filter service. We carry out forced active regeneration, professional off-car ultrasonic or pressure cleaning, and full DPF replacement where needed. We also diagnose the root cause — short journeys, faulty sensors, EGR faults — so it doesn't block again. Covers all diesel makes and models.

Full or partial exhaust replacement — back boxes, centre sections, front pipes, and manifolds. We weld, repair, or replace as required using quality stainless or mild steel parts.

Faulty lambda sensors cause poor fuel economy, failed emissions tests, and engine warning lights. We replace and clear codes to restore correct fuelling.

Full A/C service including re-gas with the correct refrigerant, leak test, and system performance check. Keeps your climate control working efficiently all year.

A seized or noisy AC compressor means no cold air. We replace the compressor, flush the system, and recharge with fresh refrigerant.

A leaking heater matrix causes a sweet smell, misted windows, and wet carpets. A labour-intensive job we carry out to a high standard.

Supply and fit of tyres for all vehicles — budget, mid-range, and premium brands. We balance all new tyres and check alignment.

Safe, permanent puncture repairs carried out to British Standard. We inspect the tyre internally before repairing — no plug-only repairs.

Tyre pressure monitoring system sensor replacement and programming. We reset the TPMS system after fitting new sensors or tyres.

Kerb damage, scuffs, and corrosion repaired and refinished to showroom standard. Diamond cut, powder coat, and painted finishes available.